For quickly measuring the thickness of paper, film, leather, rubber etc. The spindle is moved using the thumb lever. With adjustable bezel. Measuring faces are made of high grade tool steel, hardened, ground and lapped for accuracy. Thumb lever rais

The Oxford? Precision BCM400 Compound Microscope also known as a biological microscope has a magnification range of a 10x eyepiece, 4x, 10x, and 40x objective lenses and can reveal details at the cellular level. This is the microscope preferred by m

Features two measurement modes - probe for internal temperature and infrared single dot laser for surface temperature. "C/"F selectable, it has a measurement range of between -20"C to 270"C (-4" to 518"F). With back light, auto power 'OFF' and low

Specifications: Temperature range: -2O"C to 537"C / -4"F to 999"F. Distance : Spot size ratio: 12 : 1. Accuracy: -20"C to 50"C +/- 2.5"C. +5l"C to 537"C +/- (reading x 1% + 1"C). Automatic turn off: Hold for 10 seconds. Operating conditions: 0 to 40"

TVA150 This meter is for measuring airflow and temperature. It is ideally used to measure the air speed at ventilation outlets and to test temperatures in residential and commercial environments such as offices, storerooms, greenhouses and places whe

TNC150 Precise red LED light source (laser beam) together with a reflective strip, non-contact measurements can be made safely up to 40cm (15 3/4") from the target. For measuring in rpm and rps. Testing range: 100 to 30000rpm/1.7 to 500rps. 6 digit

Ideal for electrical troubleshooting & straightforward environmental testing in residential & commercial environments. The 5-in-1 digital multimeter is capable of testing the following; - Electrical testing. - Temperature from -20" to 1000"C. -

The Kennedy" 'Smile-Dial' plunger type dial gauge has an easy to read 58mm (2,1/4") diameter dial with a matt finish chromed housing and black oxidised limit hands. The mechanism is jewelled to ensure a smooth precise action. Fitted to the back of t

Model 150R For testing the hardness of hard alloys, quenched and unquenched steels, using steel ball or diamond penetrators to measure Rockwell A, B & C units of measurement. Supplied with test block, flat large, small and V notch anvils, steel ball